Best Suction Cup Bike Rack

The point is that I understand that there are several different ways that you can transport your bikes. However, it would be impossible for you to try them all out and to figure out which one works, since it would be both time-consuming and a waste of money.

Hence, I’m going to give you the opportunity to know about a different and yet efficient method of transporting your bicycles safely. A suction cup-based bike rack is what I am referring to. To be more specific, it is a suction cup-based bike rack. I understand you have a lot of questions and doubts right now… Don’t worry, I will go over everything in great detail.

In this article, you will be able to learn how to get the best suction cup bike racks as well as how to buy them.

In fact, you can install them within seconds with minimal effort (Me likey). Not only that, you don’t have to worry about whether your car is compatible. That’s a thing with a hitch hanging rack or platform rack.

Most of my friends don’t detach their bike carriers right away since they require a lot of work to install and detach. Standard roof and hitch-mounted bike carriers are expensive as well. For hitch-style racks, a trailer hitch has to be installed. This affects mileage, creates noise on the highway, and affects the driving experience, so people tend to leave it as it is.

In contrast, the suction cup, on the other hand, does not have this kind of problem. I love how clean and simple it is, and how easy it is to maneuver. Despite the fact that it is not fancy, it is very powerful and can carry a lot of weight. Despite the fact that it is bound to carry your precious bicycles safely and securely, it is bound to carry them with ease.

How Do Suction Cups Work?

It is absolutely safe to use these, as I said earlier. When you are on the road, you need to check on them every hour and make sure you drive according to the speed recommendation suggested by the rack you have selected. This is not only to ensure the safety of your bikes, but it also has a number of other benefits as well.

As one of the benefits of driving for a long period of time, you get to stretch your body. In addition, when you’re behind the wheel, you’ll be less likely to get reckless with the thought of upcoming adventure; that’s because you’ll need to keep an eye on your speed constantly while you’re driving.

There is also no hassle involved with the installation and removal of these products. It is almost certain that every single suction cup bike rack on the market has an easy install and removal process.

In spite of the fact that it is not as sturdy as a steel rack, you might have some doubts about it. I would like to know, for example, whether it will be damaged by the sun… or if you can use it while it is raining? There is no need to worry, high-quality suction cup racks can withstand extreme weather conditions without any problems.

There would be a shortening of the lifespan of the device if you kept it in the open for a long time, even if you weren’t using it at the time. After you have finished using it, make sure you pack it up (it is a very simple process) and store it away. As a result, you will be able to use it for a long period of time. And last but not least, is your car going to be damaged as a result of this? There is a very slim chance that it will happen.

Top-Rated Review

Do you still want to buy suction cups? Are you still considering buying them? Fortunately, I have added a list of my favorite products on my long list of favorite products so that it will make your life easier. We have compiled a list of 5 products that may be able to assist you in your search.

All of the questions were addressed, the features of these products were discussed, and the shortcomings of these products were addressed. This way, you will be able to get to know everything about them and decide if they are the right choice for you.

Lastly, if you are interested in purchasing one of these devices, I have included a detailed buying guide at the end of this post. Hopefully, it will help you even further and gently nudge you in the right direction as well. Let’s get right into the first product without further ado, so let’s jump in without further ado.

1. ROCKBROS Suction Cup Bike Rack Review

Best Pick

Quick Summary:

• Material: Aluminum, Rubber
• Dimensions: 37″x 8″ x 6″
• Item Weight: 2 KG
• Bike Capacity: 2
• Load Capacity: 88 lbs
• Brand: ROCKBROS

There is no doubt that this is a rock-solid product. The bike rack has a very strong construction and can hold two bikes at a time. There is no matter what type of vehicle you own, you can use this accessory in order to transport your bikes in a safe and secure manner. There are a number of mountain and road bikes that are compatible with this easy-to-use rack.

There is no need to waste any more time with fancy words on packaging. Let’s take a look at the build quality of the product.

Aluminum alloy is the material that ROCKBROS uses to manufacture its bike racks. In this way, we will be able to keep our bikes together, safe and secure in one place. Rubber suction cups have been attached to the vehicle’s bumper in order to protect it from scratches and dings. There is nothing cheap about these rubber cups at all. I think the most important thing about them is that they stick. This has been going on for a long time as well.

The good news is that you won’t need to perform any maintenance on them for months before they need to be replaced. There is no doubt in my mind. As far as keeping things together is concerned, the adhesive does a wonderful job of it.

The only issue is that when you try to fix the crank, unwanted scratches appear. In order to avoid these unwelcome marks, I use the strap that comes with the main body. This ROCKBROS Suction Cup Bike Rack doesn’t affect the aesthetics of your vehicle, so I can use it without worrying.

Amounting to around 88 pounds of weight, this rack is available in a variety of shades, including black, red, green, and blue. It can easily carry up to two mountain bikes without having to break a sweat.

There is one thing I would like to point out before mounting your e-bikes on the rack. They tend to weigh more than a standard bicycle so be sure to check the weight before mounting them.

It is very important to note that ROCKBROS Bike Rack has been designed to fit any vehicle you happen to own. It provides ‘universal support’ so that it can be used with coupes, hatchbacks, sedans, SUVs, vans, and more. Camp away… no more worrying whether the rack would fit your car or not.

As far as ease of use is concerned, you will find that it is very easy to use. It has a quick-release clamp mechanism that allows you to quickly install the front fork. Just follow the instructions carefully and you will be able to get everything set up in just a few minutes.

I would recommend that you make sure the roof as well as the sucker is clean before you install it. After that, you should install the sucker on the roof and press it down hard. If you do not press it down hard, it will not remain firmly in place, so do that and don’t worry… it will not break.

When you are pressing the sucker down, you’ll need to press the cylinder rod. When you’re pressing the sucker down, you’ll need to wait for the white line to disappear. It only takes 30 to 45 seconds at most. Once the white line disappears, you can stop pressing it down.

Using a quick release on the front sucker step of the bike, you can now fix the fork. Next, you can confirm the rear wheel position and fix the rear wheel and pedal. After that, you’re ready to go.

It is also compatible with a wide range of bicycles, which is why this bike rack from ROCKBROS is so popular. In addition to mountain bikes, road bikes, and bikes with quick-release front wheels…you name it! It has two radians on its rear wheel sucker, which makes it ideal for handling both mountain and road bikes at the same time.

There is something simple and convenient about the RockBros Suction Cup Bike Rack. It is able to carry two bikes safely at the same time without having to worry about your vehicle or your bikes. To ensure you can use it for a long time, simply attach the suction cup cover when you are not using it.

2. SeaSucker Talon Single Bike Rack Review

Using this SeaSucker Talon Single Bike Rack, you’ll be able to mount any bike quickly and securely to just about any vehicle. The clamps are made of UV-resistant rubber and the vacuum cups are made of nylon which is soft enough to conform to any car’s roof.

There is only one bike that Talon can carry at a time and the maximum load capacity is 45 pounds. There are a number of other models that can be used to carry two or more bikes, such as the Mini-Bomber, which can carry two bikes and the Bomber, which can carry three bikes. However, if you own convertibles, you might consider using KOMODO!

It’s time to talk about the build. Let’s talk about the build quality… shall we? Actually, I had no complaints regarding the build quality of the SeaSucker Talon. If you’re wondering how they’re made, it’s important to know that these are not manufactured by machines.

This rust-free, fade-free bike rack is made of 316 stainless hardware and UV-resistant rubber. It has a natural feel, like the touch of a human hand, and it can hold a staggering 210 pounds of weight. It is made from 316 stainless hardware and is fade-resistant and rust-free.

There is no doubt that every single rack made by SeaSucker is handcrafted. Furthermore, SeaSucker’s US-based support team is always available to answer all the nagging questions that people might have about the racks.

In addition to being strong enough to hold heavy bikes, this rack is also durable enough to hold bikes under difficult conditions as well. That makes it ideal for carrying mountain bikes as well as road bikes. No wonder it was the only American-made rack used by the Tour de France.

As a “Fork Mount Style” product, SeaSucker Talon Single Bike Rack is the best rack you could find for securing your bike to your vehicle without damaging the frame of your bike. I mean, you don’t want anything to happen to your bike even before you reach your destination.

In my opinion, one of the best things about suction cup bike racks is that they are less likely to damage your vehicle over time. Talon is also no exception. It does not damage your car and it’s also 3 times lighter than most hitch mount bike racks.

Whether you want to place them on the roof, trunk, or back of your car, you can do so without any trouble. As far as the Talon Single Bike Rack is concerned, it will firmly hold your bike without scratching the body of your vehicle. The rear-wheel strap is a nice gesture from SeaSucker since it helps secure the rear tire.

It is intrinsic to suction cup bike racks that they are easy to install. It takes just seconds to put this piece of a product on your bike. It is almost the same as using a ROCKBROS suction cup bike rack. The cup has to be pumped up to attach to the bike and it needs to be checked every hour to make sure the pressure is right.

The company has also incorporated an indicator that will tell you when it’s time to re-pump again. This indicator will eliminate the guesswork and take the guesswork out of the equation.

If you want to hike down the mountain range, you can take your rack, mount it, and drive your car to the next trailhead in a matter of seconds. You can also attach it in seconds with the help of the lift tab.

Especially when it comes to the design of this SeaSucker Talon Single Bike Rack, we have to say that the design is good, practical, and it does what a bike rack is supposed to do. It will keep your bike secure and safe, while being extremely lightweight will not affect your driving experience.

3. S SMAUTOP Sucker Bike Rack

I found that the SMAUTOP Sucker Bike Rack had everything that ROCKBROS couldn’t put together with their product. It has all the features and looks that ROCKBROS couldn’t deliver in their product. From a neutral viewpoint, it seems like a decent bike rack that can provide you with years of good service if you maintain it properly when you use it.

In spite of that, you would have to look at the tensile strength of the build of the bike rack and the amount of weight it is capable of carrying to determine whether it qualifies as the best suction cup bike rack.

There are three options available to you depending on how much load you need to carry. The Single-Bike or Two-Bike models will allow you to carry one bike a time, while the Three-Bike and Two-Bike models will allow you to carry two or three bikes at a time. For those looking to transport more than one bike, the Three-Bike model will be your best choice.

There is no doubt about the build quality of this bag. It is built from sturdy metal and it is also rust-resistant and weather resistant, so it can be used in the rain without any worries. However, a gentle reminder should be offered: if you do not intend to use it to carry bikes, you shouldn’t leave it out in the open for long periods of time. It will shorten its lifespan if you do.

Because of the fact that the cups are made of synthetic rubber, it won’t budge on your car at all since it is synthetic in nature. As such, you shouldn’t have any issues with it.

Additionally, as you can see in the picture, the suction cup of the vacuum pump helps to keep the frame in place. As for the crank, it is fixed with high-strength Velcro which plays a vital role in preventing scratches on the top of your vehicle.

Aside from making your car look great, the aerodynamic frame of your car will help you control wind resistance and reduce the amount of noise. Therefore, you will have a comfortable and smooth ride as a result of the aerodynamic frame.

As a whole, the structure weighs only between 2.1 and 4.5 kilograms, making it very lightweight. However, being lightweight doesn’t mean that it is incapable of carrying weight. The SMAUTOP Sucker Bike Rack can hold up to 50 kilograms of weight. This should be enough for most average users.

You might wonder how it is installed. Well, the answer is quite straightforward. You should first wipe the roof carefully so that there are no dust or water on the surface. Next, position the suction cup on the part of the roof that has a higher sheet strength. Finally, use the piston rod to gently push the suction cup downwards until there is no more force exerted.

Be sure that you lock your roof rack to the bicycle’s front fork with a quick release mechanism as soon as you finish installing the rear wheel suction cup. You should then wrap the rear wheel with nylon Velcro and fix the crank with complementary Velcro to prevent any scratches. That’s pretty much it. You are ready to ride.

There is just one more thing you should keep in mind: the recommended speed is not to exceed 120 km/h when you are transporting your bike on it. Also, make sure to check the cylinder rod white line and make sure that it cannot be seen.

The reason is due to the fact that the suction is now fully tightened and will not let go of you, which is a common mechanism of this type of bike rack.

If you are looking for a convenient and safe way to transport your bikes from one place to another without having to worry much about damaging your car or your bikes, the SMAUTOP Sucker Bike Rack is the best option.

The other great features of this backpack are that it keeps your belongings secure and also it is weather resistant, which means that you can drive on no matter if it is raining or if the sun is shining.

4. IMT Vacuum Suction Cup Bicycle Rack

There is no doubt that the IMT vacuum-mounted suction cup bicycle rack has entered the marketplace with a bang on the back of its innovative vacuum-mounted technology. It has many cool features that will make transporting your bike easy and safe for you. The rack requires little time for installation and can support a wide range of bikes as well.

The company has been manufacturing professional vacuum suction tools for about 30 years. They have really excelled in this area because they provide top-notch products designed to make the lives of their customers as easy as possible.

In addition to their strong history of producing quality products, IMT has also been able to translate their experience into the design of their bike rack. This IMT vacuum mount system has a premium steel deck with three 6″ vacuum mounts and one fork holder as well as a separate clamp for the rear wheel.

As with the S SMAUTOP, this rack can be used even when it is raining. It uses a sturdy UV and weatherproof concave rubber pad. The synthetic EPDM rubber attached to the rack will not damage your car. You will have no problems using this rack regardless of the curve of your car’s surface. That’s the great thing about it.

By a long way, I am not finished! The 6” mounts are so powerful that they can pull a force of 200 pounds and have a maximum load capacity of 60 pounds. This is very impressive for a single bike! Also, if you completely seal it up, it will hold up for up to 48 hours! If you lose vacuum, you will be notified by a red line. You will never have to guess what to expect.

Then you can mount the bikes after that, and you are good to go. To make it work, you need to pump the plunger until the vacuum pressure reaches the original vacuum pressure without removing the cup.

The rack should be inspected regularly to ensure that it has a long lifespan, and it should be protected from the sun and rain by placing protective covers over it.

The vacuum cups should be cleaned with a soft cloth or sponge before each use, followed by cleaning them with mild dish soap and water.

We are often asked by people, “How often should I check it?”.

In order to get the most out of your rack, you need to clean and lubricate the pumps regularly. As you can see, there won’t be any intermittent interruptions while you’re driving. For this reason, you just need to check the pressure every four hours. In addition to being quick and easy, it ensures that the product will last for years to come.

In addition to its incredible lightweight design, this bike rack has been designed with an Anti-Slip feature so that it can easily be attached to flat AND curved surfaces in a matter of seconds. It is also designed to hold the suction for longer than most bike racks out there, which makes it possible to attach the rack on both flat and curved surfaces.

In terms of the rear tire cradle, it is also quite robust. It has two radians, as does any standard suction cup rack. However, these two radians are designed in a way that makes them perfectly suited for both mountain bikes and road bikes. In order to prevent your back end from moving on the asphalt when you’re riding your bike, you need to use a rear wheel strap.

In case you forgot, this rack uses a fork-mount with a through-axle adapter. However, that is not the only thing that we can tell you about it. This mount can also be used with a QR axle as well. Hence, this mount will fit most mountain bikes, road bikes, and standard bikes.

A great bike rack with the perfect combination of strength, durability, and pragmatic features is the IMT Vacuum Suction Cup Bicycle Rack. This bike rack will help you safely transport your bikes without touching your car. It is capable of pulling heavier weights than you probably need and is able to withstand rough weather conditions. Overall, it is an excellent bike rack.

5. Kupper Mounts Suction Cup Bike Rack For Car

People, it is time for the last of the best suction cup bike racks for cars on my list. This is the Kupper Mounts Suction Cup Bike Rack. It is a new company in the bike rack business. But hey, you won’t be able to catch up with it! Their innovative product lineup has been taking over the market.

There are a lot of useful and cool features that come with these things, of course.

There are a few things you need to consider before you start using Kupper Mounts. Firstly, it is made from super-tough steel which makes it tough and durable. Also, it is made from weather-resistant ABS plastic which will not deteriorate over time.

I would like to debrief you on ABS plastic if you do not know what it is. There are many qualities that make ABS plastic a perfect choice, including impact, heat, chemical and abrasion resistance, dimensional stability, tensile strength, surface hardness, and more. Even at extremely low temperatures, it remains rigid and sturdy.

There is a lot of metal used in this product, to begin with. With this plastic ingredient, it becomes even tougher. And, what about the suction cups? Well, they have been made of non-marking rubber, so they won’t leave any marks on your car at all.

This powder-coated steel rack provides a decent weather-resistant seal against rain and snow, preventing your bikes from sliding or sliding around. And the rubber suction cups coupled with the powder-coated steel make the rack sturdy enough to stay in place even in the rain.

Despite its highly durable design, this bike rack only weighs a mere four pounds. Yes… it’s portable. You can mount this on the trunk or the roof of your car depending on the size of your car. Additionally, it supports any ride, including cars, RVs, and SUVs. It will not be necessary to use a luggage rack or trailer bike rack hitch.

The problem is that this system can also be used on the rear of an SUV. So if you’re still worried about how you’ll lift your bike onto the roof, you can stop worrying now. For the front wheel mount to function, you simply need to place it near the top of your rear windshield and the rear wheel mount at the bottom of your trunk. That’s all you need to do.

You will not have to keep them out in the open for a long period of time after you have used them so you can easily pack them into your luggage for travel. Trust me, you won’t be keeping them out in the open for a long time.

As long as you use the bike rack properly, you will be able to carry your bikes safely. It has a weight capacity of 45 pounds, so you can still carry your bikes safely. I forgot to mention that.

I would say that this rack is quite sturdy and durable. It has been designed to withstand heavy use and to be compatible with any type of vehicle. It is weather-proof, does not affect the driving experience too much, and can accommodate fairly large loads.

As long as you store it properly and clean it regularly, you will have no problem transporting your bikes anywhere you want with this suction cup bike rack from Kupper. It is easy to install and uninstall. Taking your bike around is a breeze now.

In the process of doing your own research, what would you look for when you are buying a suction cup bike rack?

The fact that an anomaly exists when it comes to purchasing accessories like bike racks is something that irks me. I would like to have this all over with so that I can ride my bike down the trail and forget all about it. Unfortunately, that is not how it works.

There is a considerable amount of effort that goes into researching a bike rack that will be the right fit for our needs, and, in this case, a suction cup bike rack is the right choice.

In order to purchase these items, there are a couple of differences to keep in mind. In terms of function, there are many differences since they work differently than hitch hanging racks, platform racks, trunk mount racks, roof mount racks and so on.

As you can see in this list, I mention some of the top-of-the-line suction cup bike racks to help you find the perfect suction cup rack for your bike. Here, I will disclose some vital points that will further assist you in choosing the right suction cup rack for your bike.

Suction cup racks have a high level of build quality

I always check the build quality of a product before purchasing it. I do that thoroughly. That is because I will not be able to use loads of features if the build quality is poor? If the build quality is poor, the product will not deliver the best support. Heck! It won’t last at all!

In a build of these products, what are the things that need to be checked to ensure that they are working correctly?

As a starting point, I would recommend checking the material. Generally, manufacturers don’t slack off when it comes to this aspect. They want to ensure that you get the best service possible. For example, ROCKBROS’ suction cup bike rack is made of aluminum alloy. SeaSucekr Talon uses stainless steel hardware as well.

S SMAUTOP and IMT both have a series of bike racks made from extremely strong materials that aren’t prone to rusting, and the Kupper Mounts Suction Cup Bike Rack is made from a strong steel alloy that can withstand hard weather conditions.

Check the Rubber Pad

In the next step, you should make sure that the rubber is of high quality. As you can imagine, this is of paramount importance. It is the one that holds the whole rack together. Therefore, it must be of the highest quality. Also, make sure the racks are UV-resistant because they have to be kept out in the sun for quite some time.

Secondly, you will also want to select the suction cup bike rack that is weather resistant. This is vital since you might drive through all kinds of weather. If you drive through rain or snow, you will still be able to use the suction cup bike rack under rough weather conditions like that. So, make sure you select one that meets these requirements.

Secondly, check to make sure that they’re not made from plastic. Most of the companies use rubber that is of premium quality in such a case. However, you should still make sure that you check that exclusively. Of all the suction cup racks that I have mentioned here, Kupper Mounts’ rack uses the best rubber.

The rubber pads of these racks are made of weather-resistant ABS plastic which means that they are of real quality. The other 4 racks on this list are also not shy about using rubber of high quality. For instance, S SMAUTOP uses oil-resistant synthetic rubber.

As far as we are aware, IMT, SeaSucker, and ROCKBROS all use the same kind of rubber pad. They are the same durable concave rubber pads that are weather and UV resistant. This means they do not make any irritating scratches on your vehicle. It also means that the aesthetics won’t be compromised.

Can it Carry the Weights?

You don’t want to take my words for granted, because it is a common fear factor when it comes to the matter of pulling weights. Can a suction cup handle the same amount of weight as a hanging or platform rack? Don’t worry, they can. The magic of science works.

As an explanation, let me explain how suction cups work. When you use a suction cup to hold something to the surface of your car, you are releasing the air within the cup. This eliminates the pressure inside the cup, creating a vacuum, which holds the cup firmly in place.

Isn’t it strange that the cup would slide? Well, to be honest, no. Because of the friction that is created between the cup and the surface, the cup doesn’t slide. However, there are some things that have to be done first in order to get things working this way. Don’t be disheartened. It is not difficult at all to do.

When you are ready to use the cup, always check that it is clean and free from all debris. If it isn’t, simply clean it with warm soapy water before using it. The cup can then be dried gently with a cloth that is free from lint.

The suction cup will not adhere to the surface properly if it is dirty or has dust on it. If you do not clean the surface, you will not be able to adhere a suction cup to it properly.

I would like to remind you that you can increase the suction power of your cup by rubbing a small dab of Vaseline or cooking oil on the rim of the cup. This method works great and enhances the suction power.

In any case, let’s talk about numbers. All five bike racks on this list are capable of carrying up to 40 pounds of weight. If I were to be honest, I think that’s a good number. Most bikes (from standard to mountain bikes) don’t weigh more than that, either.

There is no doubt that suction cup bike racks can support a lot of weight.

Compatibility of Vacuum Cup Bike Rack

I think compatibility is a two-sided question. On the one hand, is it compatible with any vehicle? On the other hand, what are the types of bikes which these adapters are compatible with?

There is no need to worry about fitting suction cup bike racks to any vehicle you own since they are designed to fit perfectly to it. It doesn’t matter what kind of vehicle you have, the rack will fit perfectly to it. While it can be an issue with hitch hanging racks, this shouldn’t be a problem with suction cup bike racks.

In addition, you should make sure that the bike rack you buy is compatible with your bikes. As it happens, most of the suction cup bike racks out there are compatible with a wide range of bike types. For example, ROCKBROS bike racks, SeaSucker bike racks, Kupper Mounts bike racks, IMT bike racks, and S SMAUTOP bike racks can be used with many different types of bikes.

Using a quick-release front wheel, it should be possible to carry a variety of bikes, including mountain bikes and road bikes. For instance, the Vacuum Suction Cup Bike Rack by IMT has a fork-mount and a thru-axle adapter. As a result, it is compatible with QR axles and thru-axles. However, if your bike has a barrel axle fork, you can choose the SMAUTOP Sucker Bike Rack. A suction cup bike rack is compatible with Honda CRV, Toyota Prius, Toyota RAV4 and Honda Odyssey. A suction bike rack is the best roof rack for mountain biking.

What is the ease of use ?

As a matter of fact, you already know for a fact that suction cup bike racks are fairly simple and easy to use. Make sure you choose a product that does not have any complexities, since we are primarily concerned with simplifying bike transportation. There could be some simpler accessories in our lives that we could use.

To tell you the truth, there are no complications involved in installing the suction cup bikes racks. They are easy to install. They are not very heavy. Mounting them is not difficult either.

The one thing you’ll want to pay attention to is the indicator of how long you need to press the cylinder rod. All the racks on this list are equipped with this useful feature. It gives you an idea of whether you need to press further or not. It mainly tells you if there is vacuum loss in the sucker.

So, make sure your chosen bike rack has this feature. It is a very important feature that you should always look for in a bike rack. This will help you to eliminate the guessing game from the equation. You will no longer have to rely on your memory anymore.

In some cases, the vacuum line is white, while in others, it is red. Just check it after one or two hours and you will see if there is any vacuum loss. That’s all there is to it.

Here are my final two cents on the matter

I believe that the best suction cup bike racks are simple… yet effective. There is nothing complicated about this accessory. It takes literally no time to assemble and take down. You can even store it in your backpack! What an awesome thing to do! Imagine storing a hitch hanging rack or a platform rack in your backpack.

Besides being lightweight and durable, suction cup racks can also be used for a very long time if you take care when using them. They are resistant to tough weather conditions, can withstand rough driving conditions and will not interfere with your driving experience at all. Most importantly, they keep your bikes in one place while you drive.

The best thing you can do if you haven’t tried it yet, is to give it a try and see if it meets your transportation needs?