If you are unfamiliar with this type of bike rack, you may have some concerns regarding whether it is effective. You may also want to know if they are going to fail or not.
This SeaSucker bike rack was given to us to test out for ourselves in order to provide our readers with an objective review.
I would like to take this opportunity in order to cover all of your questions and concerns that you might have regarding SeaSucker bike rack, or at least most of them.
Firstly, let’s find out what the whole idea behind it is.
SeaSucker Bike Rack – What is it and how does it work?
There is nothing new about suction cups and how they can be used to hold down heavy items, haven’t you?
However, have you ever seen one designed specifically for bicycles?
There is no doubt that the SeaSucker bike rack is exactly what you are looking for.
As I was first seeing a SeaSucker bike rack for the first time I thought, “what in the world is that? There’s no way I’m going to trust my bike to a thing like that.”
Despite this curiosity, I decided to give one a try to get a feel for how it works and how it works on a first-hand basis.
In order to make your bike rack work as well as possible, SeaSucker bike racks are made with suction cups that are intended to stick to your car and hold the bike in place. SeaSucker is one of the best brands for suction cup bike racks.
As with roof mounted bike racks, these racks serve the same purpose as rear mounted bike racks, just that they are easier to attach and remove as compared to other types of bike racks.
This SeaSucker comes with three suckers and a bracket. The bracket is made of high-density polyethylene and is very sturdy and can carry a lot of weight.
How well do Seasucker bike racks work?
There was no reason why I would just read about how great or how bad this rack is.
This is a product that I was able to test with my friend and I can confidently say that it works.
It is true that sighting this rack can leave one with a double-minded feeling, but after I attached it to my roof and attached my bike to it, I took it on a one-hour ride.
The suction didn’t only keep my bike firmly in place, it also didn’t lose its strength at any point during the process of keeping it in place.
The only thing I did was to squeeze down the seal very hard and then pump the plunger several times to make sure all the air was out of the seal.
Once I had done that, the vacuum stuck to my roof and stayed there until I removed it.
In the case of SeaSucker bike racks, are they prone to failure?
The SeaSucker bike racks are made to withstand a great deal of pressure.
Nevertheless, if you fail to follow the instructions from the manufacturer on how you should use it, you may not achieve the desired results.
If you have just purchased a new car, then you are supposed to check that everything is in order before driving it. Even if it is a Lamborghini, you will not be able to drive it if there is no gas in the tank.
If you are using a SeaSucker bike rack, the same thing applies. You have to follow all the instructions in order for the bike rack to work as it should.
The manufacturer has stated that the SeaSucker can only hold a weight of 45 pounds, which means that if you place a bike that is heavier than 45 pounds, then the SeaSucker might not be able to hold it.
You need to remove the front wheel of your bike before mounting it on the SeaSucker bike rack. If you try to use it in the same manner as a roof bike rack, you will be unable to do so. The exception is if you upgrade to a version of SeaSucker that allows you to add a wheel carrier for both wheels.
There is another thing you should keep in mind when you are using the rack. SeaSucker recommends that you drive no faster than 75mph when you use the rack. Driving faster than this is not recommended.
Overall, if you do not follow the simple instructions contained in the SeaSucker manual, it can have a detrimental effect on the operation of the machine.
Some of the common issues with SeaSucker bike racks
During our testing of the SeaSucker, we noticed a few issues that caught our attention. We found out that the bike crank on the bike had been running free and scratching our car’s paint after we returned from the one-hour trip we took with the rack for testing. The manufacturer must have overlooked this issue because the manual did not mention this issue at all. I believe that is an oversight on their part.
A few people have reported that the SeaSucker caused damage to their car when they mounted or dismounted the bike on it. We did not experience this, but it’s something to keep an eye out for.
You need to protect the edges of the SeaSucker rubber suction cups when not in use because they are very sensitive. They also need to be covered when not in use. I found out recently that my suction cup was rendered useless due to a tiny nick on the edge. Thankfully, we were able to replace it and the rack started working again.
While SeaSucker bike racks have strong suction and hold, they can fail when driving on bad roads. You may have to drive with caution when driving on bad roads due to the fact that bumps and potholes can loosen the suction and cause your bike to fall off. However, it’s important to keep in mind that this rarely happens, and you should take it into consideration when driving on bad roads.
Can you tell me if SeaSucker Bike Racks are safe to use?
In terms of safety, yes, they do work a bit differently than other kinds of bike racks, but so far they have been well received. They are relatively safe to use.
As a first impression, we were not sure if we could trust the SeaSucker bike rack, but after having tested it for a few days, we were convinced that the rack was safe.
If you would like to attach the SeaSucker to your bike and dismount it, you must follow the instructions on how to do so in order to keep yourself and your bike safe.
SeaSucker Bike Rack Failure: What you can do to prevent it
- Before mounting your bike on the SeaSucker, you need to check and double-check that the suction cups of the SeaSucker are well attached. It is important to carefully mount your bike on the SeaSucker before mounting your bike.
- If you place the SeaSucker bike rack on a surface that is not smooth or has curves, you should avoid placing it there.
- In addition, it is important when driving on the highway to drive at a reasonable speed. By all means, avoid potholes and be careful when going over bumps, as well as remembering that you have bikes on the roof of your car.
FAQs – A list of frequently asked questions
How long will my SeaSucker hold?
It is nowhere mentioned by SeaSucker how long the suction will last. We have tested ours over a one-hour ride and a two and a half hour ride and did not have any issues with the suction. It is not uncommon for others to use it for longer or shorter durations, just make sure to keep an eye on the suction power every now and then.
How fast can you drive with SeaSucker?
The bike rack recommended by SeaSucker recommends that you do not exceed 75 mph while using it. Personally, we have driven at 130 mph with the rack and have not encountered any problems. However, if you wish to be safe, you should stick to the recommended speed limit.
Will the sun damage my SeaSucker?
The SeaSucker bike rack is made with weather-resistant UV suction cups that are designed to withstand the sun. This, however, does not mean that the SeaSucker bike rack will last forever. Over time, the suctions might need to be replaced or an entirely new bike rack may be necessary.
Is it okay to use my SeaSucker rack in cold temperatures?
Sure, we have used it in cold weather, rainy weather, and windy weather and have not had any problems with it.
Should I take my SeaSucker off when I’m not using it?
As you can see, it is safer for you to take it off when you are not using it. It is easy to install and remove and it is light in weight. Thus, you should take it off when you are not using it.
Can you lock a SeaSucker bike rack?
It is possible to lock your SeaSucker bike rack by using security anchors that you can purchase from the SeaSucker company. With the security anchors, you will be able to close the opening between the joint of the door or boot while the bike is secured on the roof. Never leave the bike unattended on the roof rack.
These SeaSucker bike racks offer a great solution for bikers who do not have a roof bike rack or rear mounted rack because they are safe, easy and quick to use.
The rack is very useful, but it does cost money. It is important that you double-check the rack before using it. No matter whether you have just used it a day before, it is still important to check and double-check it before using it.
I highly recommend giving SeaSucker bike racks a try if you are looking for something different. If not for anything else, they make your bike look good on top of the car when it is on its roof.
Leave a Reply